在国外网站上找到了普通版本Giulia关ESP的方法：
原文：*****/forum/409-electronics/5905-how-do-you-deactivate-traction-control-print.html?pp=40
方法1：
Try turning DNA knob all the way to D and holding it there for a little bit see what happens. If you see a suspension broken notification don't worry lol.
把DNA旋钮打到D，一直按住，会显示一个避震器受损的图标
方法2：
Currently if you sit in the car with the ignition on car not running we have got it to turn off the ASR, press brake pedal once the accelerator 3 times and the light comes on the dash and the ASR is deactivated. Only problem is with the light on the car won't go in to the D mode on the DNA settings
点火开关通电，但应该是发动机熄火的状态下，踩刹车一次，然后踩油门三次，这时仪表盘上会显示。但问题是，在这种模式下，车辆无法进入D模式。
方法3：
Hello! I just ask that you please do not post it publicly but just share privately because Alfa Romeo might "fix" this workaround with a software update.
Also, the "friend of a friend" who leaked the information might get in trouble.
- Push the start button on, wait for checks to complete, push it off (this is just to open the mirrors)
- Go in the trunk and and open the battery slot.
- Disconnect the negative cable (all you have to do is push the small release button on top and pull) and wait a few seconds.
- Reconnect the cable and close the battery slot
- Close the trunk and go start the car. Quickly! You should do these last 2 steps in less than 15 seconds
You should see the car turning on with warnings on ESC off, hill assist off, Start-stop off, Front Collision warning off and and steering assist off.
The main throwbacks are that you are stuck in N mode and the clock resets to 0:00 Jan 1st.
懒得翻译了
----------------------------------------------------------------------------------------------------------
提车之后自己试了一下，
方法1 ，方法2 扯淡。
方法3，成功, 操作步骤：
1. 打开电源开关，让自检完成，不启动哈。
2. 后备箱打开，断掉负极，等一会。
3. 连接负极，关后备厢，把车子启动。要快！15秒以内（还会有其它的一些报警啥的，以图为证）
4. 可劲躁去吧
注意：这种情况下，车子熄火了，再启动，也还是关闭状态的。需要重新初始化，步骤：
1. 断负极。
2. 过一会儿连接上，启动，点火。
3. 方向盘左边打满，然后右边打满。
4. 开门，关门。
下赛道的同学们自己当心