发表于 2008-11-09 19:47 IP属地：未知
泼个冷水！Z-100确实不错！但是配合IC-7000应该搞这个！ AT-7000 Autotuner The AT-7000 is just 6.5" long, 6.5" deep and 1.5" tall. It weighs only 1.5 pounds, and gets its DC power directly from the radio; no separate power supply needed. The AT-7000 works with any Icom radio that supports AH-3 or AH-4 Icom antennas. This currently includes the IC-7000, IC-706MkIIG, IC-703Plus, IC-718, IC-746 and IC- 756Pro III. The AT-7000 comes fully assembled, aligned andready to use. The package includes a 14" radio interface cable and a 14" coax jumper; you're ready to operate right out of the box.
Specifications: • 0.1 to 125 watt power range (SSB and CW), 100W on 6M - 2000 memories for instantaneous bandchanging - Controlled from Icom Tuner button on radio. - Compatible with any Icom radio that is AH-4 orAH-3 compatible. - Partial radio list: IC-7000, IC-706 (all), IC-703,IC-718, IC-746 and IC-756 (all). - Tuning time: 0.1 to 6 seconds full tune, 0.1seconds memory tune. - 1.8 to 54.0 MHz coverage. Built-in frequencysensor. - Tunes 4 to 800 ohm loads (16 to 150 on 6M), 4to 3200 ohms with optional 4:1 Balun. - For Dipoles, Verticals, Vs, Beams or any CoaxFed Antenna. - Optional external Balun allows tuning of randomlength, long wire or ladder line fed antennas. - Includes Icom interface cable and coax jumper.Ready to use right out of the box. - Small Size Enclosure: 6.5L” x 6.5W” x 1.25H”.Interface cables included! Your discounted price $155.00
|
|
|
京公网安备 11010102004670号