切换新版>>

雅绅特论坛 >  中控面板拆卸大全

发表于 2007-10-09 15:50    IP属地:未知

查看 60.2W | 回复 38
中控面板拆卸大全
正打算自己改装些东西,找到了些资料,共享一下,希望对大家有用~~
曾经有同学抱怨过CD面板被4S店拆坏,看来4S店也不一定有这个资料啊,绝对内部资料,绝对首发
[ 本帖最后由 愚人指路 于 07-10-09 16:37 编辑 ]

[每日热点]:【酷车实拍】家里又添新车了 提哪吒L...

回复本楼 | 评分 | 举报

发表于 2007-10-09 15:57    IP属地:未知

I know a lot of people want to know how to remove the CD player well heres how.. This will also tell you how to completly remove the entire dashboard down to the firewall almost.
FACIA PANEL REMOVAL!
NOTE
When prying with a flat-head screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Step 1: Remove the center facia panel (A).


Step 2: Disconnect the connector (A), then remove the center facia panel (B).

The rest is up to you to figure out on this one

[ 本帖最后由 愚人指路 于 07-10-09 17:47 编辑 ]

[每日热点]:【旅行游记】人说山西好风光之黄河篇...

回复本楼 | 评分 | 举报

发表于 2007-10-09 16:05    IP属地:未知

AUDIO ASSEMBLE REMOVAL
Step 1: Loosen the screws.
Step 2: Disconnect the audio connector and antenna cable, then remove the audio assembly (A).


Step 4: Disconnect the audio connector (A) and antenna cable (B), then remove the audio assembly ©.


[ 本帖最后由 愚人指路 于 07-10-09 17:48 编辑 ]

[每日热点]:【保养维护】逍客烧机油难题被PNF技术完美解决...

回复本楼 | 评分 | 举报

发表于 2007-10-09 16:11    IP属地:未知

LOWER CRASH PAD PANEL REMOVAL
Step 1: Remove the side cover.
Step 2: Remove the fuse box cover (B).
Step 3: Loosening the crash pad lower panel mounting screw. Remove the lower crash pad panel (A).


[ 本帖最后由 愚人指路 于 07-10-09 16:13 编辑 ]

[每日热点]:【休闲生活】丰宁坝上百里天路草原之巅...

回复本楼 | 评分 | 举报

发表于 2007-10-09 16:15    IP属地:未知

CLUSTER FACIA PANEL REMOVAL
NOTE
When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Step 1: Tilt the steering column down.
Step 2: After disconnecting the trip sensor connector (A), remove the cluster facia panel (B).


[ 本帖最后由 愚人指路 于 07-10-09 16:15 编辑 ]

[每日热点]:【旅行游记】禅国囊谦 1000多个佛寺...

回复本楼 | 评分 | 举报

发表于 2007-10-09 16:16    IP属地:未知

SHROUD REMOVAL
Step 1: Loosen the screws.
Step 2: Remove the shroud (A).


[ 本帖最后由 愚人指路 于 07-10-09 16:17 编辑 ]

[每日热点]:【旅行游记】打卡妈屿岛...

回复本楼 | 评分 | 举报

发表于 2007-10-09 16:18    IP属地:未知

HEATER CONTROL UNIT REMOVAL
Step 1: Disconnect the center facia lower tray(B).
Step 2: Remove the center facia lower panel (A).


Step 3: Disconnect the connector (A), then remove the center facia panel (B).

Step 4: Loosen the heater control unit mounting screw. remove the heater control unit (A).


[ 本帖最后由 愚人指路 于 07-10-09 16:21 编辑 ]

[每日热点]:【自驾游记】中原游之须弥福寿之庙...

回复本楼 | 评分 | 举报

发表于 2007-10-09 16:22    IP属地:未知

CLUSTER REMOVAL
Step 1: Remove the cluster facia panel.
Step 2: Loosen the mounthing screws.


Step 3: Disconnect the cluster connector (A), then remove the cluster.

[ 本帖最后由 愚人指路 于 07-10-09 16:29 编辑 ]

[每日热点]:【自驾游记】神农架-白帝城-三峡-宜昌...

回复本楼 | 评分 | 举报

发表于 2007-10-09 16:29    IP属地:未知

GLOVE BOX REMOVAL
You may need to do this if you wish to change the in-cabin filter.
Step 1: Disconnect the damper (B) from the glove box (A).

Step 2: Remove the glove box ©.
(I don't feel like getting the pic but... all you do is remove those two bolts at the bottom. Just look in there you'll see them.
SIDE COVERS
Just pop them off with a screw driver. It's so easy even a kid can do it.

[每日热点]:【旅行游记】巴马世界之乡长寿村...

回复本楼 | 评分 | 举报

发表于 2007-10-09 16:30    IP属地:未知

AIR VENT REMOVAL
Step 1: Remove the crashpad side cover.
Step 2: Remove the air vent (A).

[每日热点]:【旅行游记】夏天的乌兰察布...

回复本楼 | 评分 | 举报