独乐乐不如众乐乐，无意中发现国外友人研究出不用福特账号刷导航的办法，共享出来大家研究一下
以下是原文:
How to active MyfordTouch Navigation
Modify the APIM as-built data using Forscan (you will need to request an extended license for Forscan)
You will also need a ELM327 device that can do HSCAN/MSCAN.
1) Program APIM using Forscan & ELM327 device. Change the as built data bit with
(7d0-01-02. Byte 1 = 00 No Nav. Byte 1 = 04 with Nav)
Turn key off, turn on, sync black screen for a bit, then performing routine system maintenance.... for about 2 mins.
*Unknown if ACM as built data bit needs to be changed yet.
2) Program ACM as build with bit mentioned in this thread. Not sure needed/what it does but I did it anyway.
3) Download license (BT4T-14F500-BE) from URL attached in the excel document. You will need to replace “YAABBCCD” in the URL section and provide your vehicle’s ESN number otherwise it won’t work. This appears to be case sensitive so make sure it is all uppercase letters.
You can get the ESN number in the settings section on the myfordtouchunit. You do not need to change anything else in the URL.
*To do non-north america and non-latest software you will need all the proper field values for your vehicle from the as build and from the current software installed on the vehicle.
*Ford could change this URL and this would no longer work!
4) Create the USB device and edit the autoinstall.lst file to only install the BT4T-14F500-BE file.
5) Stick in A7 nav SD Card.
6) Enjoy the trip!
All credit goes to flsdiver for the URL/Excel doc/steps needed.
//forum.xda-developers.com/windows-mobile/general/myford-touch-navigation-activation-t3368080
[ 本帖最后由 den_18 于 2016-5-11 11:38 编辑 ]

百度翻译：
如何主动MyFordTouch车载导航
修改为使用forscan APIM建数据（你会需要一个扩展的许可forscan）
你还需要一个ELM327装置可以做hscan / MSCAN。
1）程序使用forscan & elm327装置APIM。改变所建数据位
（7d0-01-02。字节1 = 00无资产净值。字节1 = 04资产净值）
关键关，打开，同步黑屏幕的一点，然后进行日常系统维护…大约2分钟。
*未知如果ACM竣工数据位需要改变吗。
2）程序ACM建立与该线程点提到。不知道需要/它做什么，但我做到了。
3）下载许可证（bt4t-14f500-be）从URL附加在Excel文件。你将需要更换的“yaabbccd”URL中的部分并提供您的车辆的ESN号码否则它不会工作。这似乎是敏感的，确保它是所有大写字母。
你可以在设置部分的ESN号码在myfordtouchunit。你不需要改变任何其他的网址。
＊非北美国和非最新软件，您将需要所有的车辆从作为建立和从当前软件安装在车辆的适当的字段值。
*福特可以改变这个网址，这将不再工作！
4）创建USB设备和编辑autoinstall.lst文件只能安装bt4t-14f500-be文件。
5）坚持在A7导航SD卡。
6）享受旅行！
一切归功于flsdiver的URL / Excel文档/步骤。

这个翻译水平，呵呵呵

327就能刷？

小二，拿菜谱…………

看半天没看明白！ 主要是外国人的思想跟国人的有区别，尤其是语言表达上！！！

不过还是说一下 楼主辛苦了

真要能行，327 又要火了

对，用327修改APIM的一个字节激活，然后好像再刷一次

这个貌似比较强大，哪位可以试验一下！