先进技术汽油机油

API SM / CF

空气污染指数链霉素/炭纤维

ILSAC GF-4

ILSAC绿- 4

DESCRIPTION

描述

High performance, multi-grade oil formulated from VHVI Synthetic base oil and the latest additive technology for use in passenger car and light truck gasoline/LPG engines requiring low viscosity, API SM, SL, SJ or ILSAC GF-4 performance lubricants under all operating conditions. It is optimized to provide complete engine protection.

高性能，多级油的合成基础油VHVI制定并在轿车和轻型卡车使用最新的汽油添加剂技术/液化石油气发动机的要求粘度低，空气污染指数钐，可溶性，律政司司长或ILSAC绿- 4润滑油的性能在所有工作条件。该技术优化发动机提供完整的保护。

PERFORMANCE STANDARDS

性能标准

API SM/CF

空气污染指数链霉素/炭纤维

ILSAC GF-4

ILSAC绿- 4

Ford WSS-M2C929-A

福特WSS - M2C929 -阿

GM 6094M

通用汽车6094M

VHVI Synthetic

VHVI合成

CUSTOMER BENEFITS

客户利益

Maximum power and fuel economy

最大功率和燃料经济

PThe wide temperature range capability of the synthetic base fluid ensures correct oil viscosity to reduce friction at start-up, and to provide maximum lubricity during high temperature operation.

PThe宽的温度范围合成基础油的能力，确保正确的油的粘度，以减少启动时的摩擦，并提供在高温下运行的最大的润滑性。

The effective anti-wear additive system minimizes wear in even the most sophisticated valve train mechanisms, including those with variable valve timing.

在有效的抗磨损添加剂磨损降到最低，即使在最先进的气门驱动机制，包括可变气门正时的。

Prolongs engine life

延长发动机寿命

Metallic detergent and ashless dispersant additive system provides superior control of ring belt and piston skirt deposits, even under the most severe operating conditions.

金属洗涤剂和无灰分散剂系统提供的环带和活塞裙存款优越的控制，即使在最严酷的工作条件。

Lower maintenance costs

降低维护成本

Exceptional thermal stability and oxidation resistance prevents in-service oil degradation which contributes to filter blocking and sludge formation in the oil galleries, crankcase and valve train.

优异的热稳定性和抗氧化性防止在职石油降解这有助于阻止和污泥过滤器在石油画廊，曲轴箱和阀门列车编组。

Minimizes oil consumption

减少石油消费

The synthetic, highly shear-stable formation controls oil flow through the ring belt area by maintaining oil viscosity, and reduces oil evaporation at the elevated ring zone temperature experienced under all operating conditions.

合成，高剪切稳定性控制石油的形成，通过环带一带的交通流量保持油的粘度，并减少了高架环区所有工作条件下经历高温油蒸发。

All-temperature wear resistance

全温度耐磨性

Advanced non-conventional base oil formulation, high performance additive systems and leading edge viscosity index improver deliver excellent shear stability and maximum wear protection in high speed, high temperature driving conditions and rapid, highly effective oil film protection and component wear resistance during very low temperature cold starts.

先进的非传统的基础油配方，高性能添加剂系统及先进的粘度指数改进提供一流的剪切稳定性和高速最大的磨损保护，高温行车条件，快速，高效的油膜保护和部件的耐磨性，在非常低的温度冷启动。

TYPICAL APPLICATIONS

典型应用

Gasoline engine of passenger cars.

汽油发动机的轿车。

Light truck gasoline engines.

轻型卡车汽油发动机。

Gas-fuelled (natural gas and LPG) spark ignition engines where conventional passenger car motor oils are recommended.

气体燃料（天然气和液化石油气）火花，因为常规的轿车发动机油，建议燃式发动机。

Four-stroke gasoline engines in motorcycles.

四冲程汽油在摩托车发动机。

Portable power equipment where the manufacturer recommends conventional passenger car motor oils.

便携式电力设备制造商建议在传统的轿车发动机油。

KEY PROPERTIES

主要性能

SAE Grade 汽车工程师协会级	5W/30 5W/30	5W/50 5W/50	10W/30 10W/30	10W/40 10W/40
Density,kg/liter@15˚C 密度，kg / @ 15˚荤升	0.856 0.856	0.858 0.858	0.865 0.865	0.866 0.866
Kinematic Viscosity,mm2/s@40˚C 运动粘度，平方毫米/秒@ 40˚荤	59.9 59.9	112.9 112.9	67.2 67.2	99.7 99.7
Kinematic Viscosity,mm2/s@100˚C 运动粘度，平方毫米/秒@ 100˚荤	10.1 10.1	17.9 17.9	10.0 10.0	14.9 14.9
Viscosity Index 粘度指数	156 156	177 177	140 140	157 157
Pour Point,˚C 倾点，˚ç	-39 -39	-42 -42	-39 -39	-36 -36
Flash Point,COC,˚C 闪点，COC，˚ç	218 218	220 220	218 218	232 232

[ 本帖最后由 de7752 于 09-11-24 13:07 编辑 ]

GS............